@Huawei-pidhisamestate
I guess the success for this operation depends on the luck😂 50/50
@heitormeirelles1607
What a pain, he had to use flux on the larger capacitor when soldering the new one or saving the contact pad, it was full of dirt residue on the board, at the beginning of the video he should have cleaned it with a brush and isopropanol or something like that instead of melting flux on top of it first, on the small capacitor he used flux at the right time to solder the new one and it was shiny and smooth like butter
@wilsongarzahandyman7949
You doing great job don't listen that haters
@true3d
Really? I have seen many boards with serious damage. It is black like that, there is going to be some damage to the board and the traces. The capacitor would not cause that kind of black area. You don't know what you doing. Look at the size of that tip.
@Floyd940
Jajajjaja. Great job . I love waching it
@Anakhamzah94
Nice
@meictec
i mean if it works, but you could have done a better job
@오경근-l7k
이야.... 까만 물감을 바른걸 모르나... PCB 기판은 불이나는게 아니라 터지는것에 가까움.. 고로 저렇게 기판이 깨끗할 수가 엄슴... 최소한 부품 밑에 있던 녹색은 없어야 정상임...
@jahirkhan8157
Wha u use for clean sir?
@mrquilez77
Muy cutre
@jaybird57
559 or 227, wouldnt matter..
@tristanlange9969
Będzie działać, ale jak długo? Uważam to za niepoprawne wlutowanie nowego kondensatora. Lutowanie też pozostawia wiele do życzenia
@jon7354
Пойдёт но не окуратный работа
@Magneziy
Треба було зразу відмити, потім знімати і запаювати не феном а паяльником
@翔梁-z3q
沒有工具成不了事
@DemButterSeinBoii
Honestly This is Not a well done Job :/
@RomanFilatov-u8z
Что ты такое нанёс,что чернота слезлаза?
@새디-p6h
기판은 생각보다 튼튼하구나.. 다 타버린거 같아도 닦아내니 타버린 부품 외엔 멀쩡~
@TVRepairLAB