@jessiegibson9023
Good video thanks
@LillianRamirez-c9h
Great video. I am having problems embroidering on plastic clear stadium bags without it tearing through. I keep adjusting, but I have not yet conquered it. Any suggestions?
@carinabam5833
with the fill stitch you have the option "travel on edge" can this be used as well?
@creat3dlab12
I'm having a tough time understanding why center run would be required for thinner satin stitches that are in 1-2mm ballpark. In my mind, center run doesn't do much in terms of stabilizing the fabric beneath. At the best, with the center run, you are maybe minimizing puckering (in the middle of the satin stitch) in a so small factor that is probably not worth it. Without the center run, you would be pulling the fabric towards the center a little bit more right, but it really doesn't matter if the stitches are in 1-2mm ballpark. Especially if you are doing a thin satin stitch over a good foundation such as tatami fill. For example, if you are doing a thin border around a tatami fill, wouldn't it make more sense to use a center run that is offset towards the edge of the border that is not overlapped with the tatami part (to lock the fabric to the stabilizer before doing satin)?
@LanceMcGrew
When using Edge Run and ZigZag - does it matter which is underlay 1 or underlay 2? ZigZag first or Edge Run first?
@j.rabbitcrafts