@citizenarcane9092
Thanks for the video it described exactly what was wrong with my model 20316 20in Recycler/Rear Bagging Lawn Mower. Found that the replacement wheels on my model now have the metal gears mounted on the wheels and require replacing the pinion gear as well. For my model 20316 the new wheel part number is 105-3036, the pinon gears are 131-5399. Buy a few snap rings 32151-61 while you're at it - you may need them. Thanks for the vid and hope my info is as useful as yours.
@stanleyjones8152
My laptop did nor show the bottom half of the Toro the whole time. That was what I needed! to reassemble the wheel.
@GrizzlyJ44
Great video, just get rid of the music so I dont have to listen so hard
@mattnash9747
Hey sir my personal pace wheels constantly spin. I tried looking into disconnecting the personal pace control handle but it’s tied into the blade motor. What kind of advice can you give me? Thanks.
@budbone1955
Both of my drive wheels were toed in facing the front. The bracket the wheel is screwed on was bent inward causing the wheel to be forward too much to mesh with the shaft gear causing the grinding noise and the stripping of both gears.I purchased two new shaft gears . The wheel gears looked good and I used a prybar to bend the brackets on the edge facing the front of the mower outward until they were parallel with each other with both wheels off . I put both rear wheels back on and the bending of the wheel mounting plate solved the problem ,
@njgrplr2007
Did you say you need a new pinion gear if you switch to the wheels with metal gears?
@GooglelyTube
Replaced my wheels last year on my Toro Recycler 22" after trying to just deal with poor self-propel feature for a number of years. Found your video, when to my local Toro dealer and ordered replacement wheels with those stupid cheap plastic gears. Here it is just one year later, and I've got the same problem again. It may be the last Toro mower I buy if they haven't changed their design. I've had three Toros and each time they get made cheaper and cheaper while the price keeps going up. Briggs & Stratton motor is great, the rest of the mower........meh.
@kommoncents-------1
My Toro mower had a metal gear that lost one of the teeth. The gear is riveted to the plastic part so they force you to buy a new wheel which is expensive. I was able to buy just the gear from toro. I drilled out the rivet heads and removed the bad gear, put the new one on the stems and welded the gear on the stems. I was going to try removing the rivets and putting screws in instead but the rivets wouldn't come out
@b.goodrum5481
I have a 22"toro rear wheel grinding like crazy so bought all parts needed to repair and for the life of me I can't get the pinion gear off. I've tried light tapping on the geaqr, using a torch etc. Nothing works and it just won't come off. Any suggestions?
@leekumiega9268
I have a 28 year old Lawnboy Gold series made by Toro where the entire belt is on the top of the deck . The belt and the 3 speed transmission have never failed in all that time and I cut a 1/4 acre once a week. Why can't they make them like that anymore? Planed obsolescence ? Except for cleaning and greasing the small drive gears so they will slip when going backwards and replacing the wheels when they wore out and split the drive train has been trouble free. What recently failed the blower housing from metal fatigue where it bolted to the engine from so many pull starts and I replaced the pull cord itself once.
@Hatron56
why do these guys always put loud background music so loud you can;t hear anything they say clearly.?
@breaddrinker
I'm getting a really strange pinging sound from the drive wheel on the left when it's engaged and in motion but not cutting. Thought for a while it was a loose blade, but definitely the drive wheel.. Any idea?
@mikehrdlicka8635
I do alignment and check mesh. Also drive bearings inside of adjuster
@coryshook7648
I have metal gears on the wheels and the axle but the axle gears look bad where the wheel steel gears must be worn but they dont look worn or worn much at all. I ordered axle gears from Amazon. I know they can be installed wrong,(backward) but I will make sure I dont.
@ELS1SON
Agreed with others, music and text don't mix. I may have to look for another video with clear sound.
@stanleyjones8152
My inability to see the bottom was a solvable thing. Not Reid's fault.
@LeaperChad7
Wheels roll while off the ground. Stop when on ground. Help. Changed belt. Inspected gear box. Grease dry. Idler pulley seems to be worn. Belt fits too close to inside
@brandonspicer2482
My AWD 20353: My front drive works but the rear drive won't engage neither wheel moves automatically...help
@tommcdonald53
Doesn’t last long, replace the wheels with steel and new bearings, there is a kit out there with new smaller gears also
@DIYReid