@ashborn142
i dont know how to thank you man ....your video has been soo helpfull and i also learned so many new things ....thank you sooo much
@infoforbusypeople
I'm from Argentina! what a great job you do! I'm so greatful for all the value I get in your channel! keep it up to 1000000 and beyond!
@buffplums
This is such a great series, I’m extremely grateful to you for sharing all of your knowledge
@mateiselescu9168
Most indians are explining very bad or even don't explain. You are a special one. I learned so much arduino and esp32 from you. You should keep this chanell alive!
@markwhitaker7887
Very straight forward and worked with no issues.
@mycameras6814
If i understand correctly this “remote” control works ONLY for local devices on the same local network. It would be useful to show how this project can be extended to proper remote control from a true remote location. This would require that the remote browser can access the ESP which sits on your local network. Hence some method like port forwarding to get through your firewall without major compromise of home network security. Also need a method to cope with changes to your dynamic IP address (of your home) such as using the free NO-IP service hence a DNS domain name used by remote browser instead of 4 digit IP.
@BenimAğam
çok teşekkür ederim, onlarca video ya baktım ama en açıklayıcı video bu olmuş, elinize sağlık
@kpieceemmry3387
My esp didn’t show on my Wi-Fi at all I have tried it with the three of my Esp32 after pressing the reset button it didn’t generate any IP address neither is it in coverage
@gamedevker
I can connect to my ESP32 Wrover's Network BUT the webpage just doesnt load
@RaphaelDavid-b9e
You are just one in a million
@tarasdyriv1380
Sir, all the time the same problem - "website not reachble", could you please help?
@ששיכהן-ג8נ
Hi, do you have maybe the same connection | process by MicroPython?
@ex0ja
This all worked but for some reason my Esp32 kept the SSID and password from the previous project (e.g. MyESP32) , in the code it says the SSID is ESP32-Network. Everything else worked fine though.
@osamaalrawi8453
thanks for your video, but its better not to use the Pins 16 & 17 as they are used for Rx & Tx
@bkcganeshblogs
Sir everything is fine.But I am unable to control the server from my mobile hotspot.Can I control the server from anywhere with the IP address
@luvchugh616
Can u explain the difference between wifi access point and wifi server
@Akash_24675
Can we connect Microphone and relay module with Esp32 ? If yes, then how can ? Please give suggestions
@DAJUMEL23
excelente funciona corretamente !!!! obrigado pelo seu conhecimento e demonstração do mesmo!!
@guillermoamodeo9170
Excellent !! Very clear !! Thank you
@bennguyen1313