6 JetKVMs, 1 Rack – The Ultimate Setup!

I wanted to rackmount 6 JetKVMs in my server rack, thankfully there's a DIY solution for it.
Merch Shop 🛍️: https://l.technotim.live/shop

Thanks to JaredC01 for the designs! https://github.com/JaredC01
LabStack-Rack Designs: https://github.com/JaredC01/LabStack-...
JetKVM: https://jetkvm.com (provided most of the JetKVMs however no input into this video)

Other Products I used (affiliate links below)
M2 x 16mm Screws: https://amzn.to/3DxNZia
M3 x 8mm Screws: https://amzn.to/3XJxq9N
M3x4x5mm Threaded Inserts with tip: https://amzn.to/41C1NA8
PoE Splitter: https://amzn.to/41pxKeU
10 ft. USB-A cables: https://amzn.to/3FsA9hu
USB A to USB C adapters: https://amzn.to/4kGfZAL
10 ft. Cat6 cables: https://amzn.to/4iCoScL
Female HDMI to HDMI coupler: https://amzn.to/41TbDij
Mini HDMI to HDMI (I didn't end up using these): https://amzn.to/3Fjs12U

Video Notes: https://technotim.live
Support me on Patreon:   / technotim  
Sponsor me on GitHub: https://github.com/sponsors/timothyst...
Subscribe on Twitch:   / technotim  
Gear Recommendations: https://l.technotim.live/gear
Get Help in Our Discord Community: https://l.technotim.live/discord
Main channel:    / @technotim  
Talks Channel:    / @technotimtalks  

(Affiliate links may be included in this description. I may receive a small commission at no cost to you.)

00:00 - Intro
00:52 - Rackmount Design
01:38 - Fabricating the metal
02:02 - Assembling the mount
02:29 - Heat Set Inserts
03:34 - Scratch Warning
03:57 - Mounting all 6
04:15 - 3D Printed material
05:00 - Connection Plan
07:19 - What I would do different if it were production
08:24 - Where in the rack to mount it
09:25 - Running cables in rack
10:23 - Mounting it in the rack
10:55 - Getting rid of my old KVM Switch
12:14 - Cleaning up cables
12:57 - Final thoughts

Thank you for watching!