This helicopter is a package product equipped with an EPP storage box. The single battery package without the remote control is priced at 2899. It can be used with your own model aircraft remote control. Futaba's SFHSS protocol can be directly linked to the flight control. Other standards An external receiver is required. Another configuration is to match Gutian’s T6 remote control, which is priced at 3239. You can watch the evaluation video of Goosky S2 to learn about this remote control.
After you get it out of the box, you need to install the main rotor and tail rotor by yourself, which only requires a few screws. However, it should be noted that this helicopter has a left-hand tail rotor and the main rotor is reversed, so be careful about the installation direction of the rotor. After installation, it cannot be put into the EPP storage box, so this box can only be used for long-term storage in the field or for long-distance transportation.
The appearance details of this helicopter are definitely the highlight. The hard-shell plastic simulation casing has fine two-color matte spray paint, and is equipped with a large number of simulated detailed parts such as line cutters, small antennas, decoy launchers, etc., as well as rich With rivets and engraved lines, it can be said that this is a static model-level product.
In terms of flight performance, I set 3 IDELs for him, corresponding to three throttle lines of 58%, 65%, and 74%, and three pitch curves. In normal mode, actions such as hovering and low-speed routes can be completed, but the pitch response is slow. But after switching to IDEL3, the pitch response is very good, and it can even complete inverted flight. If you use the normal mode, the battery life can reach the 15 minutes advertised by the manufacturer, but if you use air routes, it may only be 8-10 minutes. The self-stabilizing mode is very friendly to novices, and the helicopter returns to center quickly, allowing for rescue or novice practice experience.
Brand: Goosky model
Model: E2
Model: UH-1Y Venom
Scale: 1/35
Battery: 3S 1600mAh Lipo
Built-in protocol: SFHSS
这架直升机是一款搭配了EPP收纳箱的套装产品,不含遥控器的单电池套装售价2899,可配合自己的航模遥控器使用,futaba的SFHSS协议可与飞控直接对频,其他制式需使用外接接收机。另一个配置是搭配谷天的T6遥控器,售价3239,这款遥控器的情况可以去看谷天S2的测评视频了解。
到手开箱后需自行安装主旋翼和尾旋翼,仅需几颗螺丝,不过要注意的是这架直升机为左置尾桨,主旋翼反转,所以要看好旋翼安装方向。安装好后是无法放进EPP收纳箱中的,所以这个箱子也只能是作为内场长期存放或者长途出门携带。
这架直升机的外观细节绝对是亮点,硬壳的塑料仿真机壳上有着精细的双色哑光喷漆,搭配上大量的仿真细节零件比如切线器、小天线、诱饵弹发射器等等,以及丰富的铆钉刻线,可以说这简直是一架静态模型级别的产品。
飞行性能上,我为他设置了3个IDEL,分别对应58%、65%、74%三个油门直线,以及三条螺距曲线。在普通模式下,可以完成悬停、低速航线等动作,螺距响应较慢。但切换到IDEL3后螺距响应很好,甚至可以完成倒飞。续航上如果使用普通模式,可以达到厂家宣传的15分钟,不过要是空中航线可能也就是8-10分钟了。自稳模式对新手很友好,直升机回中迅速,可以实现救机或者新手练习体验。
可以说这架谷天的E2这绝对是一款飞行的工艺品,它精致的外观、丰富的细节,简直都不舍得拿出去飞行了,有能力的玩家可以在出厂产品的基础上,再细化细节,打造一架完美的超级休伊。
品牌:谷天模型
型号:E2
机型:UH-1Y毒液
比例:1/35
电池:3S 1600mAh锂电池
内置协议:SFHSS
コメント